Answer: Here are the approximate dimensions of diamond-tip to mounting-point height & distance, important for VTA and overhang adjustment respectively:
Answer: We do not officially recommend any cleaning methods for cleaning your diamond stylus. The safest method would be to use a soft artist brush (size 000) to very gently remove any dust/grime from the diamond. Please note that extreme care should ...
Answer: As an example, the 1000 series features a rubber damper suspension combined with a tie wire. The rubber damper gives it a quite high static compliance of 24 mm/N in the horizontal plane, and the tie wire gives it a lower static compliance of ...
Answer: Yes, they are interchangeable. Going to the Elektra stylus from an Elan is a massive upgrade. Elan has a spherical stylus, whereas the Elektra has an elliptical one. Sonically, it’s the difference between 60s and 70s technology. You will hear ...
Answer: Goldring MCs have quite high outputs compared to the number of windings so, they don’t need much “stepping up”. On the EAR MC3 40 ohm setting you have a gain of x10 which gives an output level to your MM input of 5 mV which is perfect. On ...
Answer: Below is a picture of a conventional cantilever and stylus arrangement. The cantilever has a foot angle of 24 degrees to match the VTA and the diamond sits upright with the central playing edge at 90 degrees to the groove. This is the type ...