Answer: Here are the approximate dimensions of diamond-tip to mounting-point height & distance, important for VTA and overhang adjustment respectively:
Answer: As an example, the 1000 series features a rubber damper suspension combined with a tie wire. The rubber damper gives it a quite high static compliance of 24 mm/N in the horizontal plane, and the tie wire gives it a lower static compliance of ...
Answer: We do not officially recommend any cleaning methods for cleaning your diamond stylus. The safest method would be to use a soft artist brush (size 000) to very gently remove any dust/grime from the diamond. Please note that extreme care should ...
Answer: Yes, they are interchangeable. Going to the Elektra stylus from an Elan is a massive upgrade. Elan has a spherical stylus, whereas the Elektra has an elliptical one. Sonically, it’s the difference between 60s and 70s technology. You will hear ...
Please find attached and below the instructions for the correct packing of the Goldring GR3 Turntable when returning it. Failure to return the product correctly packaged may result in damage which is ultimately the liability of the sender.
Answer: Goldring MCs have quite high outputs compared to the number of windings so, they don’t need much “stepping up”. On the EAR MC3 40 ohm setting you have a gain of x10 which gives an output level to your MM input of 5 mV which is perfect. On ...
Answer: Below is a picture of a conventional cantilever and stylus arrangement. The cantilever has a foot angle of 24 degrees to match the VTA and the diamond sits upright with the central playing edge at 90 degrees to the groove. This is the type ...