Eroica H/LX - Q. What's the static and dynamic compliance of these cartridges?

• Related Articles

• Q. What is the difference between static and dynamic compliance?

  Answer: As an example, the 1000 series features a rubber damper suspension combined with a tie wire. The rubber damper gives it a quite high static compliance of 24 mm/N in the horizontal plane, and the tie wire gives it a lower static compliance of ...

• Eroica HX / H - Q. What are the differences between the new Eroica HX and the old Eroica H?

  Answer: The main difference is that the traditional square core armature which will be found on many traditional MC cartridges produced today and which we used in the Eroica H, this has been exchanged for a modern cross-shaped pure iron armature core ...

• Goldring Eroica Cartridges - Instruction Booklet

  For information on the setup and care of your Goldring Eroica cartridge, please see the attached document.

• 2000 Series - What's the dynamic compliance of my 2000 Series cartridge?

  Answer: Dynamic compliance of 2000 Series cartridges measured @10Hz is 18 mm/N

• Eroica HX / LX - Q. What is the difference of the “new pure-iron cross-armature design” to the iron armature of Eroica LX?

  Answer: The two designs are very similar which means that the HX and LX are now much closer in performance – however, the fewer windings on the LX means that the moving mass is still even lower than the HX, and because it must work into an MC phono ...