Eroica - Q. What size are the mounting screws with my Eroica cartridge?

• Related Articles

• E Series - Q. What size are the mounting screws with my E Series cartridge?

  Answer: The E series uses M2.5 x 8mm screws to attach it to the head shell.

• Eroica - Q. What is the stylus tip to mounting point height and distance?

  Answer: The stylus tip to mounting point measurements for the Eroica cartridge are as follows Height: 16.7mm Distance: 9.4mm

• EROICA - Q. Will a Goldring EROICA cartridge be compatible with my Naim ARO tonearm?

  Answer: Unfortunately the EROICA has a tip to mounting bolt distance of about 11mm, so I'm afraid that it would not be compatible with a Naim ARO tonearm. The ARO was designed for LINN 3 point mounting cartridges such as the Troika, and luckily LINN ...

• Goldring Eroica Cartridges - Instruction Booklet

  For information on the setup and care of your Goldring Eroica cartridge, please see the attached document.

• Eroica HX / H - Q. What are the differences between the new Eroica HX and the old Eroica H?

  Answer: The main difference is that the traditional square core armature which will be found on many traditional MC cartridges produced today and which we used in the Eroica H, this has been exchanged for a modern cross-shaped pure iron armature core ...