Answer: We very much like the sound of Musical Fidelity phono pre-amps. They measure very flat which is important and have low noise and distortion – in short, they won’t get in the way of the sound of the cartridge at all. Budget dependant, we would ...
Answer: No, the output of the GR3 is line level only so, it will overload a dedicated phono input. Instead you should use the line in or aux in on your equipment. You can use either the phono to phono or phono to 3.5 mm jack cables provided to ...
Answer: Please note that with most other turntables, the GR1 and GR1.2 did not have built in phono stages, so one would need to be purchased separately.
Answer: If your phono pre-amp does not have any adjustment for loading capacitance, then there is nothing that can be done in this regard. The best advice in this instance would be to use the lowest capacitance cables possible. A cable capacitance of ...
Answer: No, the GR3 is designed to be plugged directly in to the line in or aux in sockets of any amplifier, powered speaker or other music system. You can use either the phono to phono or phono to 3.5 mm jack cables provided to achieve this.