GR3 - Q. How do I remove greasy finger prints from the painted surface of the plinth?

GR3 - Q. How do I remove greasy finger prints from the painted surface of the plinth?

Answer:
Do not use solvents or abrasive cleaners. Dry dust should be removed with microfibre cloth only. If particularly dirty, spray furniture polish onto cloth and then wipe over. Always fit the stylus guard before wiping plinth.

    • Related Articles

    • Q. How do I clean a stylus?

      Answer: We do not officially recommend any cleaning methods for cleaning your diamond stylus. The safest method would be to use a soft artist brush (size 000) to very gently remove any dust/grime from the diamond. Please note that extreme care should ...

    • GR3 - Q. How is the perspex lid/cover cared for?

      Answer: Do not use solvents or abrasive cleaners. Dry dust should be removed with microfibre cloth only. If particularly dirty remove and wash with slightly soapy water or spray furniture polish onto cloth and then wipe over.

    • Goldring G101 Turntable - 1970s Product Flyer

      Please find the product flyer attached; the Goldring G101 was a 1970s deck and Goldring’s first try at a belt drive turntable – all previous ones had been idler wheel drive.

    • GR3 - Original product presenter

      Please find attached the original Goldring GR3 product presenter.

    • Goldring GR1.2 and GR2 Turntable Instructions

      For more information on the setup and installation of your Goldring GR1.2 or GR2 turntable, please refer to the attached document.