GR3 - User Manual

• Related Articles

• Goldring GR1.2 and GR2 Turntable Instructions

  For more information on the setup and installation of your Goldring GR1.2 or GR2 turntable, please refer to the attached document.

• Q. Can I fit an E Series Cartridge to a Goldring Lenco GL75 headshell (2024)

  Answer. As of late December 2024 Goldring are now able to offer an adaptor plate to allow the fitting of E Series cartridges to the GL75 turntable. These adaptors can be purchased directly from Goldring, please use the Support Ticket system and ...

• Goldring G101 Turntable - 1970s Product Flyer

  Please find the product flyer attached; the Goldring G101 was a 1970s deck and Goldring’s first try at a belt drive turntable – all previous ones had been idler wheel drive.

• GR3 - Q. Do you have a protractor for setup purposes, or can you recommend one?

  Answer: Yes, a good one is provided as part of the Goldring Stylus Fitting Kit available separately.

• GR3 - Q. How do I change the speed between 33 1/3 and 45 rpm?

  Answer: You need to manually adjust the drive belt onto a different pulley. Lift off the platter and mat, then locate the small silver motor pulley at the top of the turntable. Move the black round-section drive belt to the large grooved section of ...