Q. I have a 1006 cartridge and I am looking at a replacement D42 stylus, does the body need changing over time?

• Related Articles

• G800 - Q. What would be a good replacement for my old Goldring 800 cartridge?

  Answer: This is the classic late 1960’s Goldring 800 series cartridge based on the variable reluctance principle often referred to as moving iron. There is a permanent stationary magnet and a coil in the body of the cartridge. The stylus block ...

• GL75 - Q. I need a new stylus for my Golding GL75 turntable?

  Answer: The GL75 was fitted with a G800 cartridge, but unfortunately, given it's age, the stylus is no longer available as a replacement part.  We advise looking at the Goldring E Series cartridges as suitable replacements. For more information, ...

• Q. What are the technical specifications for the 2500 moving iron cartridge?

  For use on the finest turntables, where a high output moving magnet cartridge is required. The tapered cantilever with mounted 2 SD diamond gives a smooth but detailed sound, while the metal body delivers fine bass definition. Threaded base, allowing ...

• GR3 - Q. Can I upgrade my E3 to a 3rd party moving magnet cartridge?

  Answer: Yes, the GR3 is compatible with most 3rd party MM (moving magnet) cartridges.

• Q. Can I fit an E Series Cartridge to a Goldring Lenco GL75 headshell (2024)

  Answer. As of late December 2024 Goldring are now able to offer an adaptor plate to allow the fitting of E Series cartridges to the GL75 turntable. These adaptors can be purchased directly from Goldring, please use the Support Ticket system and ...