Q. I have a Kenwood KD-990 with original arm and head shell, which cartridge would you recommend?

• Related Articles

• Eroica HX / H - Q. What are the differences between the new Eroica HX and the old Eroica H?

  Answer: The main difference is that the traditional square core armature which will be found on many traditional MC cartridges produced today and which we used in the Eroica H, this has been exchanged for a modern cross-shaped pure iron armature core ...

• GR3 - Q. Can I fit an MC (moving coil) cartridge to the GR3 at a later date?

  Answer: No, the integrated phono amp inside the GR3 is for MM (moving magnet) cartridges only and it cannot be bypassed.

• Eroica HX / LX - Q. In comparison to Eroica LX: Do you raise the voltage by using a stronger magnet or by more windings on the coils?

  Answer We use extra coil windings.  The reason for this is that in order to work into a high-impedance MM input the output impedance of the Eroica HX needs to be raised accordingly and this can most easily be achieved by increasing the number of ...

• Q. What were the specifications of Excel & Excel GR?

  The Goldring Excel was a true audiophile cartridge, designed to compete with the very best moving coil models of that time. Hand built and finished with a superbly crafted rosewood front piece and aluminium side plates, the Excel's ultra-rigid body ...

• Eroica H/LX - Q. What's the static and dynamic compliance of these cartridges?

  Answer: The Eroica H/LX have an average static compliance of 18 mm/N and a dynamic compliance of 10 mm/N at 10 Hz which makes them compatible with tonearms of an effective mass of between 8–30g . As the cartridges are hand built, both these figures ...