Q. Which Goldring cartridge can I use with my Linn Basik tonearm?

• Related Articles

• Q. Which Goldring cartridge can I use with my Linn LP12 with Ittok LVIII tonearm?

  Answer: As far as the Linn arm goes, we cannot think of a better partner for it than the Ethos. We developed the Krystal specifically for Linn and the Ethos shares quite a lot of components with that cartridge, so it will be a great match as far as ...

• Q. Which Goldring cartridge can I use with my DJ record deck with a straight tonearm?

  Answer: In order for any cartridge to track a record properly, without causing distorted sound or damage using a tonearm with a single pivot point (most turntables have this unless they are linear tracking), the arm must have two things; overhang and ...

• Q. Which Goldring cartridge is suitable for my Rega tonearm?

  Answer: Rega tonearms do not have a facility to easily adjust VTA (vertical tracking angle). The 2000 series has a height from diamond tip to mounting point of 18.5mm which is within the typical range for most cartridges, however we believe that this ...

• EROICA - Q. Will a Goldring EROICA cartridge be compatible with my Naim ARO tonearm?

  Answer: Unfortunately the EROICA has a tip to mounting bolt distance of about 11mm, so I'm afraid that it would not be compatible with a Naim ARO tonearm. The ARO was designed for LINN 3 point mounting cartridges such as the Troika, and luckily LINN ...

• Q. Why is my cartridge skating out?

  Answer: The natural tendency for the stylus and therefore the arm to be deflected towards the centre of the record seems counter intuitive, but it is caused by the off-set angle of the headshell. This offset angle, combined with the correct amount of ...